Item # AX100100 — 25A DC Motor Controller, SAE J1939
This product is obsolete. For units in the field, the documentation downloads section is retained on our website. In many cases, the product has been superseded by another newer model.
The 25A, unidirectional or bi-directional DC motor control features open loop speed control, with closed loop speed control and external feedback control available on request. The unit allows the user to map its control input to either of the 2 command inputs or messages from a CAN bus. The Enable function may also be mapped to 2 inputs or CAN. The device is suitable for moist, high shock and vibration environments, and features a highly efficient and robust design with isolation for drive and processing circuits.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
This product is obsolete. For units in the field, the documentation downloads section is retained on our website. In many cases, the product has been superseded by another newer model.
The 25A, unidirectional or bi-directional DC motor control features open loop speed control, with closed loop speed control and external feedback control available on request. The unit allows the user to map its control input to either of the 2 command inputs or messages from a CAN bus. The Enable function may also be mapped to 2 inputs or CAN. The device is suitable for moist, high shock and vibration environments, and features a highly efficient and robust design with isolation for drive and processing circuits.
Order Code
P/N: AX100100
Input(s)
2 Signal Inputs (0-5V, 0-10V, 0-20 mA, 4-20 mA or Digital)
Signal Outputs
10-5V signal provides feedback of the duty cycle being applied to the motor or of another selected variable.
Digital Outputs
2 On/Off (3A)The user can select the following options for output using the EA.Digital Control Responses:• Disabled • Blinking • Normal • Inverse • Latching
Enable Control Responses: • Dout ON if Control or Enable ON • Dout ON if Control and Enable ON • Dout ON when Motor Running • Dout ON when Motor Stopped • Dout ON if Pou
Output To Motor
H-bridge 50A @ 24VDC nominal for 2 minutes at room temperature 37.5 @ 24VDC nominal for 30 minutes at room temperature 25A @ 24VDC nominal for 1 hour minimum
Output Current
2 Proportional (0…2A) or Hotshot Digital (2A)Ramp and Dither Setpoints are Configurable
CAN Port(s)
1 CAN port (SAE J1939)
Operating Voltage
12 or 24VDC Nominal (9…36 VDC)
Control Logic
Standard embedded control logic is provided.
User programmable functionality using Electronic Assistant (P/N: AX070502).
Enclosure
Encapsulated in an aluminum extrusion with stainless steel end plates.
5.50 x 6.93 x 2.38 inches
139.7 x 176.02 x 60.6 mm
(W x L x H including connectors, excluding mating connectors)
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Datasheet
User Manual
2D Drawing
Step Files (3D)
Compliance
KIT (AX080203 Converter, AX070115 Wire Harness)
KIT (AX080200 Converter, AX070103 Wire Harness)
Protocol Converter, Ethernet / RS-422 / 2 RS-232 / SAE J1939 CAN
12 Input, 12 Output Valve Controller, CANopen®, Extended Functionality
12 Input, 12 Output Valve Controller, SAE J1939, Extended Functionality
Quadrature Encoder Inputs, Dual Valve Controller, SAE J1939, 1 Mbps
Quadrature Encoder Inputs, Dual Valve Controller, SAE J1939, 500 kbps
Quadrature Encoder Input, Dual Valve Controller, SAE J1939
CAPV-H-4-20MA-1.2A-4C-7M Connector Amplifier, 4-20 mA Input, 1.2A Output, DIN 43650A, 7m Cable
KIT (AX142100 Protocol Converter, Ethernet / RS-422 / 2 RS-232 / SAE J1939 CAN, AX070533 Cable, AX070531 Cable)
SAE J1939 CAN <-> Modbus RTU <-> Modbus TCP/IP Protocol Converter
Thermocouple Scanner, CANopen® with CE, UL508, cUL Compliance
12 Digital Inputs, 8 Relay Outputs, Discrete Input/Output, SAE J1939
4 Channel Strain Gauge, CAN Controller (2.0B, SAE J1939)
4-20 mA to 5-195 mA Output Converter (DIN Rail Mount)
ModbusRTU <-> ModbusTCP/IP <-> CAN Bidirectional Protocol Converter
CAN + I/O Wire Harness for AX100100 Motor Controller, 2M
KIT - 3 Wire Harnesses for AX100100 Motor Controller, 2M
2 Input, Dual Valve Controller, SAEJ1939, High Temperature
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories