Axiomatic Technologies Corporation releases new engine temperature measuring and monitoring controllers which interface with Thermocouples, PT100 or PT1000 RTDs.
September 30, 2020The AX186000 6 Channel Thermocouple Module reads 6 Type TC’s and communicates the temperature information over a SAE J1939 or CANopen® bus. Type J, K, B, E, N, R, S or T Thermocouples are accepted. CAN bus ports are isolated from all inputs and the power supply. Axiomatic SAE J1939 controls are configured via the […]
Read MoreAxiomatic Technologies Corporation releases a series of I/O controllers with one or more relay outputs for engine applications and with marine type approvals.
June 1, 2020The AX03021X has an isolated interface with a SAE J1939 network (standard SAE J1939, high speed SAE J1939 or CANopen®). It accepts 8…36Vdc battery power and is commanded by 10 universal signal inputs (voltage, current, digital, PWM, pulse or counter) from sensors or switches as well as another resistive and digital input. The controller outputs […]
Read MoreAxiomatic Technologies Corporation releases a series of Isolated DC/DC Converters for 12Vdc, 24Vdc and 48Vdc device power on heavy equipment.
May 26, 2020The Isolated DC/DC Converters interface with 12Vdc batteries to provide clean power for radios or other devices. They accept a low voltage input range down to 5Vdc in order to remain active during engine cranking which ensures the radio operation is unaffected. Operation is also maintained during load dump. The AX083120 model provides 48 Watts […]
Read MoreAxiomatic Technologies Corporation releases a new Discrete I/O module with 8 Form C relay outputs for engine applications.
March 27, 2020The compact Discrete I/O Module reads 12 discrete inputs and sets 8 Form C relay outputs while networking with other CAN devices (SAE J1939 or CANopen®). The unit is a battery powered device with the ability to withstand engine cranking, reverse polarity, and transient power conditions. In engine applications, information is provided to the engine […]
Read MoreAxiomatic releases a compact 48V or 24V to 14V, 16.8V or 27V Converter/Charger.
January 31, 2020In CAN based systems, utilize a compact 24Vdc/14Vdc, 2A Charger/Converter. Features: 24Vdc/14Vdc, 2A (28 Watts) Converter. Other models include: 48V/14V (Model AX090650) or 48V/16.8V (Model AX090680) or 48V/27V (Model AX090670). 14Vdc, 2A Battery Charger for SLA or AGM batteries. Typical charging efficiency of 91% (12Vdc battery). Non-isolated. 1 CAN port (SAE J1939) – Battery charge […]
Read MoreManage 110V/96V/72V battery power to 24V or 12V sensitive electronic devices using the Axiomatic AX08320X DC/DC Converters.
December 1, 2019Features: 110V, 96V or 72Vdc nominal input, Wide input voltage range (20V to 137V, some derating of output regulation for input less than 42V), 24Vdc, 240 Watts output or 12Vdc, 240 Watts output, Isolated, Optional Enable signal, Typical efficiency of 92%, Input inrush current limit, Thermal protection for over temperature, Reverse battery, over and […]
Read MoreAxiomatic releases an Automotive Ethernet Converter for rugged applications.
October 29, 2019The Axiomatic Automotive Ethernet Converter provides a purely physical, bi-directional conversion between Automotive Ethernet (100BASE-T1), and Ethernet (100BASE-TX) via PHY transceivers. No packets are stored or modified in this device. The converter supports a baud rate of 100 Mbit/s. Status LEDs provide information on connection link, and communication. The converter is designed to work on […]
Read MoreAxiomatic products feature auto-detect baud rates for SAE J1939 networks.
August 26, 2019Axiomatic SAE J1939 products can operate at standard 250 kbit/s and 500 kbit/s baud rates or a non-standard 1Mbit/s baud rate. The required baud rate is detected automatically upon connection to the CAN network. Auto Baud Rate Detection (ABR) functionality is implemented in our inclinometer and gyroscope family and will be extended to other Axiomatic […]
Read MoreAxiomatic now offers a Triaxial Inclinometer Gyroscope for moving machines with CANopen.
June 28, 2019Part of a growing family of inclinometers for machine control, the AX060900, AX060910 and AX060911 measure pitch and roll inclination angles in a full ±180-degree orientation range. The angles can be compensated by a 3D gyroscope to minimize the influence of dynamic linear accelerations caused by vibrations and machine operational movements. The units can also […]
Read MoreAxiomatic releases a CAN bus (SAE J1939 or CANopen) connected Single Valve Controller with DIN 43650A mounting style.
April 8, 2019The CAN Single Valve Controller, p/n: AX021100, accepts SAE J1939 and p/n: AX021101 accepts CANopen messages to command a solenoid up to 2.5A. Powered by 12V or 24V machine batteries, the DIN 43650A mounting style locates the electronics directly on the valve for distributed control. Other form factors available include a remote mount model, a […]
Read More